| Customization: | Available |
|---|---|
| Battery Type: | Lithium-ion |
| Channels: | 100 |
|
Still deciding? Get samples of US$ 185/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Analog | DMR | PoC | Multimode |
| Portable Radio | Portable Radio | Portable Radio | Portable Radio |
| Mobile Radio | Mobile Radio | ||
| Repeater | Repeater |
DMR TDMA 2 timeslots on a single frequency (12.5KHz Channel Spacing)
In direct mode this radio supports two voice calls simultaneously due to DMR two timeslots, which means two communication paths on 1 frequency at no extra costs or frequency license. Spectrum efficiency is greatly increased.
Manual Channel Editing
You can add/delete/edit channels on your radios without having to connect to a PC.
Radio Priority-based Interruption
This function enables a radio with a higher level to interrupt communications between radios with lower levels, giving higher priority to radios with higher levels. This means better dispatching efficiency.
Remote Kill/Revive
Such functions enable you to kill or revive a radio over the air. This greatly facilitates dispatching work and can be especially useful should a radio happen to be lost. You can easily remote kill the lost radio and confidential information can be kept from leaking out.
Private Call, Group Call & All Call
The versatile calling functions bring more efficiency to your teamwork.
Transmit Interrupt
This function enables a supervisor to interrupt a radio conversation in order to clear a channel for more important communications.
Compatible with Belfone SDP System
BF-TD800 is fully compatible with our SDP system.
| General | |
| Frequency range | VHF:136-174;UHF:350-390/400-470/450-520 MHz |
| Channel Capacity | 100 |
| Channel Spacing | 12.5KHz/25KHz |
| Operating Voltage | DC 7.4V (±20%) |
| Battery capacity | 2000 mAh |
| Battery Life(5/5/90) | Public Network: 14hours; PMR Network: 11 hours |
| Frequency Stability | ±1.5ppm |
| Antenna Impedance | 50Ω |
| Dimensions | 60(L)* 39(W)* 103(H)mm |
| Weight | 300g (include battery) |
| Network Standards | LTE-FDD: B1/B3/B5/B8; LTE-TDD: B38/B39/B40/B41;WCDMA: B1/B8 TD-SCDMA: B34/B39 |
| Transmitter | |
| RF Output Power | High Power:5W; Low Power:1W |
| 4FSK Modulation | 12.5kHz only data:7K60FXD; 12.5kHz data and audio:7K60FXE |
| FM Modulation | 12.5 kHz:8K50F3E; |
| Modulation Limiting | ±2.5kHz @ 12.5kHz; |
| FM Noise | -40dB |
| Conducted Emission | -36 dBm≤1GHz/-30 dBm≥1GHz |
| Adjacent Channel Power | ≤-60dB |
| Audio Response | +1/-3 dB |
| Audio Distortion | 3% |
| Digital Voice coder Type | AMBE+3000 |
| Receiver | |
| Digital Sensitivity | 5% BER:0.25 uV |
| Intermodulation | >60dB |
| Adjacent Channel Selectivity | >60 dB |
| Spurious Response Rejection | >65 dB |
| FM Noise | -40dB |
| Audio Response | +1/-3 dB |
| Audio output power | 500mW |
| Audio Distortion | 3% (Typical) |
| Conducted Spurious Emission | -57dBm |
| GPS Accuracy | Horizontal Accuracy≤-10m(with well signal) |
| TTFF (Time To First Fix) Cold Start | < 1 minute(with well signal) |
| TTFF (Time To First Fix) Hot Start | < 10second(with well signal) |
| Environmental Specifications | |
| Operating Temperature | -20ºC-+60ºC |
| Storage Temperature | -30ºC-+85ºC |
| Humidity | MIL-STD-810C/D/E/F Standard |
| Vibration & Shock | MIL-STD-810C/D/E/F Standard |
Communications for Efficiency and Safety
1. Q: Are you a manufacturer?
A: Founded in 1989, owning a 23,000 square meters manufacturing base, more than 200 R&D engineers and 300 manufacturing workers, we are among the top manufacturers and designers in China mainland for two-way radios and systems.
2. Q: What is MOQ (Minimum order quantity)
A: 2 pcs for sample test first is recommended. The price policy sets MOQ for bulk order based on cooperation relationship with us as a distributor, dealer or premium dealer, or OEM cooperation. Please contact us for details.
3. Q: Do you accept customized?
A: Rebranding is acceptable and OEM&ODM is welcomed.
4. Q: Could you offer free sample to test?
A: Sample will be charged firstly, but will be refunded to you when you put bulk order on us.
5. Q: What is your lead-time for order?
A: 1-2 days for sample, 3-30days for bulk order, depends on the quantity for new inquiries. We do forecast for long-term business relationship partners.
6. Q: When can I find tracking information of sample?
A: We will send you the tracking number of sample within 2 days after delivery.
7. Q: How do you ensure your quality?
A: The product is designed and produced with good material in the industry. The company is ISO 9000:2008 certified and we make 100% OQC before delivery. Both above reasons ensure low defective rate for our products. We set warranty policy for products and accessories. Please contact us immediately if some unpredictable defectives happen. Thanks
){kind=link}